Subscribe to Our Youtube Channel
Related Manuals for Dexter Laundry WCVD-WN Series
Summary of Contents for Dexter Laundry WCVD-WN Series
- Page 1 WCVD-WN Series OPL Washers Programming Guide Starting serial number 516180 8533-075-001 (6/13)
- Page 2 Bath Cycle Time “ct” 0 to 15 minutes for Prewash, Rinse1 and Rinse 3 to 15 minutes for Wash and Final Rinse. For the baths that can, if the time is set to zero, then that bath will be eliminated from the cycle. Bath Water Temperature “t”...
- Page 3 Cycle 1: Sheets and Pillowcases (Health Care) Cycle 1: Sheets and Pillowcases (Health Care) Bath Bath Cycle Water Water Delay Spin Injection Time (min.) Temp. Level Fill Time (min.) Source Flush Prewash Wash #1(Detergent) Rinse 1 #2 (Bleach) Rinse 2 Rinse 3 Rinse 4 Final Rinse...
- Page 4 Cycle 4: Guest Laundry (Hotel / Motel / Healthcare) Bath Bath Cycle Water Water Delay Spin Injection Time (min) Temp. Level Fill Time (min) Source Flush Prewash Wash (#6(Detergent/Bleach) Rinse 1 Rinse 2 Rinse 3 Rinse 4 Final Rinse #4 (Sour/Soft) Cycle 5: Rags and Mops (Hotel / Motel) Bath Bath Cycle...
- Page 5 Washer Programming Instructions THERE ARE TWO WAYS TO MODIFY PROGRAMMING OF THE V-SERIES OPL SIX (6) PREPROGRAMMED FORMULAS Option 1: Programming can be accomplished manually using the machine controls or by connecting to the machine control using a PDA (personal digital assistant). For instructions on using a PDA with this washer control and software, please contact your local Dexter distributor.
-
Page 6: Rapid Advance Mode
Rapid Advance Mode To enter the Rapid Advance mode, turn the key CCW. The Rapid Advance setting is not marked next to the key, but turning the CCW until it stops selects this mode. The Rapid Advance mode can be entered from either the Idle mode or during the cycle.
Need help?
Do you have a question about the WCVD-WN Series and is the answer not in the manual?
Questions and answers