Handlink Technologies WG-500P User Manual page 55

WG‐500P Hotspot in a Printer
Item
TFTP Server
Session Trace
Primary TFTP Server IP
Address
Secondary TFTP Server IP
Address
Send Session Trace log file
every~ minutes.
Send to Email
E-mail Server
IP Address or Domain Name
SMTP Port
E-mail (SMTP) Server needs
to check my account
Username
Password
Email From
Name
Email Address
Email To
Email Address 1
Email Address 2
Default
Disable Disables or enables session trace function.
Empty Enter the IP address of the primary TFTP server.
Empty Enter the IP address of the second TFTP server.
10 minutes The field means to send the session trace log file every interval
minutes. The value range is 5 to 1440 (minutes).
Disable Enables or disables the send to e-mail function.
Empty Enter the SMTP server IP address or domain name. The
maximum allowed characters length is 50.
Empty The SMTP port allowed range is 25 or 2500 to 2599.
Disable If your SMTP server requires authentication before accepting
e-mail, click on check box. These values (username and
password) are supplied by your network administrator, SMTP
server provider or ISP.
Empty Enter the username for the SMTP server. The maximum allowed
characters length is 64.
Empty Enter the password for the SMTP server
Empty Enter the name you would like to appear in the "message from"
field of your outgoing message. The maximum allowed characters
length is 20.
Empty Enter your e-mail address. This is the address others will use to
send email to Email Address 1/Email Address 2.
Empty Enter your first e-mail address to receive the logs.
Empty Enter your second e-mail address to receive the logs.
54
Description