Handlink Technologies WG-500P User Manual page 25

WG‐500P Hotspot in a Printer
PPTP Client (Point‐to‐Point Tunneling Protocol)
If PPTP Setting is selected, then this screen will appear. Please enter the IP address,
Username and Password provided by your ISP.
Figure 3‐1‐9 Internet Connection Setting Screen—PPPoE Setting
Item Default
Username Empty
Password Empty
PPP MTU Setting 1492
TCP MSS Setting 1452
Service Name Empty
Connect on Demand and Max Idle Time
Connect on Demand Enable
Max Idle Time 10
Minutes
Enter the user name provided by your ISP. The user name can consist of up
to 80 alphanumeric characters and is case sensitive.
Enter the user password provided by your ISP. The password can consist of
up to 80 alphanumeric characters and is case sensitive.
MTU (Maximum Transfer Unit) specifies maximum transmission unit size.
MSS (Maximum Segment Size) specifies maximum segment size.
Enter the service name provided by your ISP. The service name can consist
of up to 64 alphanumeric characters and is case sensitive.
You can configure your WG-500P to cut your connection with your ISP after
a specified period of time (Max Idle
Time). If you have been disconnected due to inactivity, Connect on Demand
24
Description