Handlink Technologies WG-500P User Manual page 33

WG‐500P Hotspot in a Printer
Accounting Port
Share Secret Key
Secondary RADIUS Server
Server IP
Authentication Port
Accounting Port
Share Secret Key
Retry times when
Primary fail
Retry Frequency ~
Seconds
Accounting Service
Interim Update Time
Authentication Method
WISPr Smart Client
Enable
Login Mode
1813 Enter the accounting port number; the accounting port number must
match with the RADIUS server setting. The allowed numbers are from
0 to 65535.
Empty The share secret key, the key number also has to match with the
Server setting. Up to 64 characters are allowed.
Empty Enter the IP address of RADIUS server.
1812 Enter the authentication port number; the authentication port
number must match with the secondary RADIUS server
setting. The allowed numbers are from 0 to 65535.
1813 Enter the accounting port number; the accounting port number
must match with the secondary RADIUS server setting. The
allowed numbers are from 0 to 65535.
Empty The share secret key, the key number also has to match with the
secondary RADIUS Server setting. Up to 64 characters are allowed.
1 Specify the retry times when primary fail.
3 The field default value is 3 seconds.
Disable Enables or disables the accounting service.
5 Minutes Specify the interim update time.
CHAP CHAP Enter the authentication method of RADIUS server.
Disable Enables or disables WISPr Smart Client roaming function.
Directly Reply Options: Directly Reply, Proxy Reply with "Redirect Login Page" URL
and Proxy Reply with Specific URL. The login mode information for
the IPASS GIS connection. (Provided by your ISP).
32