WG‐500P Hotspot in a Printer 1 Introduction The WG‐500P is a compact intelligent gateway. It provides Plug’ Play Internet access, advanced security and network management. The WG‐500P is designed for service providers, system integrator or hotspot venue operator without backend‐RADIUS‐Server to have integrated solution for rapid deployment, which can start hotspot service quickly and easily and enhance service performance. The WG‐500P is an ideal solution for hotel lobbies, coffee bars, airport lounges, conference facilities and other sites that commonly host business travelers, and offers instant high‐speed Internet connections. With its IP Plug and Play technology, ...
WG‐500P Hotspot in a Printer 11 Package Contents Please inspect your package. The following items should be included: WG‐500P One WG‐500P One Thermal papers (50 meter) One Power Adapter One Ethernet Cable (1.5 meter) One Quick Installation Guide Two Detachable Antenna One Product CD If any of the above items are damaged or missing, please contact your dealer immediately. 12 Features Wireless data rates up to 300 Mbps Supports up to 30 simultaneous Users IP Plug and Play (iPnP) Comprehensive security 64/128‐bit WEP encryption WPA encryption WPA2 Encryption IP/URL filtering Intelligent Management Built‐in AAA (Authentication/Accounting/Authorization) and Billing mechanism ...
WG‐ ‐500P Hotspot t in a Printer 13 Precau utions Never r remove or r open the c cover. You m may suffer serious inju ury if you to ouch these parts. Never r install the system in th he wet loca ations. Use on nly the orig inal fitting A AC power a dapter othe erwise ther re is a dange er of severe e electrical s shock. Avoid exposing th he WG‐500P P to direct s sunlight or a another hea at source. Choos se a well‐ve ntilated are ea to positio...
Page 8
WG‐500P Hotspot in a Printer Figure 1‐4‐2 Front Panel Figure 1‐4‐3 Rear Panel Paper roll housing Printer Cover Tear Bar, for paper cutting Button A Button B Button C Push Button, for printer cover opening Reset Button DC power supply connector 10. RJ45 port 11. Micro USB connector 12.
WG‐500P Hotspot in a Printer UPLINK LED: Off: A port has not established any network connection. Yellow light: A port has established a valid 10/100 Mbps network connection. Yellow Blinking: 10/100 Mbps traffic is traversing the port. Reset Button: The WG‐500P has a reset button at the rear panel of the device. Use this function to reset the system back to factory defaults. Power Jack: Used to connect the external power supply with the WG‐500P. 141 Printing a test page After you have installed your printer, you should print a test page to make sure the printer is functioning properly. To do this act as follows: 1. Turn the printer off. 2.
WG‐500P Hotspot in a Printer 142 How to load paper rolls Please follow the steps to correctly load paper rolls. Figure 1‐4‐4 Paper rolls loading 9 ...
WG‐500P Hotspot in a Printer 15 Technical Specifications 151 Hardware Specifications Network Specification IEEE802.3 10BaseT Ethernet IEEE802.3u 100BaseTX Fast Ethernet IEEE802.11b/g/n Wireless LAN ANSI/IEEE 802.3 NWay auto‐negotiation Wi‐Fi Compatible Connectors One WAN Port (10BaseT/100BaseTX Auto cross‐over) One Micro USB connector Encryption WEP (Wired Equivalent Privacy) 64/128‐bit RC4 WPA (Wi‐Fi Protected Access) WPA2 (Wi‐Fi Protected Access) External Antenna Type Dual detachable diversity antenna with reverse SMA LED Indicators One POWER LED One WAN 10/100M Link/Activity LED One Wireless Link/Activity LED One System LED Power Requirement External Power Adapter Input: 100‐240 VAC, 50/60 Hz Output: 12V, 1.5A Environment Conditions Operating Temperature: 0 to 50°C 10 ...
WG‐500P Hotspot in a Printer Storage Temperature: ‐10 to 60°C Operating Humidity: 20~80% non‐condensing Storage Humidity: 20% to 90% non‐condensing Certifications FCC part 15 Class B, CE , C‐Tick , VCCI Dimension Size: 109×155×90 (W×D×H )mm Weight: About 340g (Net) Printer Tray Push button: push to open printer cover Tear bar: cuts receipt paper Button A: flashing when printer cover is opened Paper roll housing: put paper roll here Paper Roll and Printing Paper width: 58 (+0/‐1)mm Paper length: 50M (max.) Paper thickness: 65 um Paper roll outside diameter: 63 (+2/‐2) mm Paper roll inside diameter: 12 (+0.5/‐0) mm Paper Detection: Photo interrupter Printing width: 48 mm Printing Method: Direct thermal Printing Speed: 25.4 mm/ sec Dot resolution (dots/ mm): 8 (203 dpi) Thermal head service life: 1 pulses or 50Km 152 Software Specifications Networking IEEE802.3 10BaseT Ethernet IEEE802.3u 100BaseTX Fast Ethernet IEEE802.11b Wireless LAN IEEE802.11g Wireless LAN IEEE802.11n Wireless LAN 11 ...
Page 13
WG‐500P Hotspot in a Printer Supports 30 Simultaneous Users IP Plug and Play (iPnP) HTTP Proxy Support WEP64/128bit WPA-PSK (TKIP) WPA2-PSK(AES) WPA/WPA2 Mix mode SMTP Server Redirection DHCP Server(RFC 2131) DHCP Relay(RFC 1542) Static IP WAN Client DHCP WAN Client PPPoE WAN Client(RFC 2516) PPTP WAN Client NAT(RFC 1631) IP Routing NTP (Network Time Protocol) Support Local Account: 256 Max Session Number: up to 16384 Marketing Cooperation Advertisement URL link Walled garden Customizable log‐on and log‐off pages Portal Page User Accounting and Authentication Built‐in Authentication Web‐based Authentication RADIUS AAA Support (RFC 2865, 2866) Secondary RADIUS User Authentication and Accounting ...
Page 14
WG‐500P Hotspot in a Printer SSL Administration VPN Pass through (IPSec/PPTP) Customize SSL Certificate Pass Through IP/MAC/URL Address Restricted Destination Filtering IP/URL VPN (IPSec/PPTP) Pass through PPTP VPN Client WEP WPA WPA2 WPA/WPA2 Mix mode Management Web‐based Management Tool Firmware Upgrade via HTTP/TFTP Wizard setup for step‐by‐step Configuration Backup/Restore/Factory Default Setting Remote Authorized Management Real‐time Session List Syslog (System/Subscriber/LAN device) E‐mail logs SNMP v1/v2 (MIB II, Private MIB) System Information Table Status Report (Daily/Monthly/System/Network) SSL certificate upload 13 ...
WG‐500P Hotspot in a Printer 2 Installation 21 Connecting the Antennas The WG‐500P provides two antenna connectors on the rear of the unit. 22 Installation Requirements Before installing the WG‐500P, make sure your network meets the following requirements. System Requirements The WG‐500P requires one of the following types of software: Windows 98 Second Edition/NT/2000/XP/Vista Red Hat Linux 7.3 or later version MAC OS X 10.2.4 or later version Any TCP/IP‐enabled systems like Mac OS and UNIX (TCP/IP protocol installed) Standard phone line for xDSL modem Or Coaxial cable for Cable modem Web Browser Software (Microsoft I.E 5.0 or later version or Netscape Navigator 5.0 or later version) ...
Page 16
WG‐500P Hotspot in a Printer Dynamic IP Dynamic IP Setting Fixed IP Your fixed IP address for the WG‐500P Your subnet mask for the WG‐500P Your default gateway IP address Your DNS IP address PPPoE Your user name and password from your ISP PPTP PPTP Server IP Address from your ISP PPTP Local IP address from your ISP. PPTP Local IP subnet mask from your ISP. Your user name from your ISP Your password from your ISP Your PC Requirements The Static IP settings for the PC Your PC’s fixed IP address Your PC’s subnet mask Your PC’s default gateway IP address Your PC’s primary DNS IP address Note: 1. The gateway’s default IP address setting is “10.59.1.1”. 2. The gateway’s default subnet mask setting is “255.255.255.0”. The Dynamic IP settings for the PC We recommend that you leave your IP settings as automatically assigned. By default, the WG‐500P is a DHCP server, and it will give your PC the necessary IP settings. 15 ...
WG‐500P Hotspot in a Printer 23 Getting Start WG‐500P Connection 1. Connect the DC power adapter to the WG‐500P and plug it into a power socket. 2. Connect WG‐500P and xDSL modem with an Ethernet Cable. Figure 2‐3‐1 WG‐500P Connection 16 ...
Page 18
WG‐500P Hotspot in a Printer Configure TCP/IP of your computer For Windows user, 1. Click Start > Control Panel, click Switch to Classic View and double click on Network Connections. 2. Right click on the Local Area Connection and click Properties. 3. Double click Internet Protocol (TCP/IP). 4. Choose Obtain an IP address automatically. 5. Click OK to close the Internet Protocol (TCP/IP) Properties and click OK again to close the Local Area Connection. Figure 2‐3‐2 TCP/IP Setting 17 ...
WG‐500P Hotspot in a Printer 3 Configuring the WG500P 31 Setting Wizard Step 1: The ESSID’s name by default is related to the last 4 numbers of Wlan MAC. If the Wlan MAC is“00‐90‐0E‐00‐12‐34", the default is“Wireless‐1234_1(2,3,4)". Please serach ESSID“Wireless‐1234_1"and connect it. Step 2: Start your browser, and then enter the factory default IP address 10.59.1.1 in your browser’s location box. Press Enter. Figure 3‐1‐1 Web Browser Location Field (Factory Default) Step 3: The WG‐500P configuration tools menu will appear. In the Username and Password field, type the factory default user name admin and password admin and click Login. If you are first time setting the system, the wizard setup screen will appear. You will be guided, step‐by‐step, through a basic setup procedure. ...
Page 20
WG‐500P Hotspot in a Printer Figure 3‐1‐3 Wizard Setup Screen Figure 3‐1‐4 System Quick View Note: 1. This Web agent is best viewed with IE 5.0 or Netscape 6.0 and above browsers. 2. Username and Password can consist of up to 20 alphanumeric characters and are case sensitive. 3. If for some reason your password is lost or you cannot gain access to the 19 ...
Page 21
WG‐500P Hotspot in a Printer WG‐500P Configuration Program, please press the reset button to load the device to manufacturer defaults. 4. If the WG‐500P doesn’t send packet in 5 minutes (default), the WG‐500P wills logout automatically. 5. Proxy needs to set disable first when administrator accesses admin UI. Step 4: Internet Connection Setting Select the appropriate Internet connection type to connect to your ISP. Figure 3‐1‐5 Internet Connection Setting Screen DHCP Client The device can work as a DHCP client. This allows the device to obtain the IP address and other TCP/IP settings from your ISP. If your xDSL/Cable comes with this feature, please enable Use DHCP Client. 20 ...
Page 22
WG‐500P Hotspot in a Printer Figure 3‐1‐6 Internet Connection Setting Screen Static IP Setting If Static IP Setting is selected, then this screen will appear. Enter the IP address information provided by your ISP. Figure 3‐1‐7 Internet Connection Setting Screen—Static IP Setting 21 ...
Page 23
WG‐500P Hotspot in a Printer Item Default Description 0.0.0.0 IP Address Enter the IP address provided by your ISP. 0.0.0.0 Subnet Mask Enter the subnet mask for the IP address. 0.0.0.0 Gateway IP Address Enter the Gateway IP Address provided by your ISP. Empty ...
Page 24
Connect on Demand and Max Idle Time Connect on You can configure your WG-500P to cut your connection with your ISP after a Enable Demand specified period of time (Max Idle Time). If you have been disconnected due ...
Page 25
Connect on Demand and Max Idle Time Connect on Demand Enable You can configure your WG-500P to cut your connection with your ISP after a specified period of time (Max Idle Max Idle Time Time). If you have been disconnected due to inactivity, Connect on Demand Minutes 24 ...
Page 26
WG‐500P Hotspot in a Printer enables your WG-500P to automatically re-establish your connection as soon as you attempt to access the Internet again. If you wish to activate Connect on Demand, click the radio button. If you want your Internet connection to remain, click the radio button of keep alive. The Max Idle Time maximum value is 65535 minutes.
Page 27
WG‐500P Hotspot in a Printer Step 5: Wireless Setting Wireless Setting: This page allows you to Channel ID and 802.11 Mode for wireless connection. Figure 3‐1‐10 Wireless Setting Screen Item Default Description Channel Enter the channel ID for wireless connection. 802.11 Mode 802. 11n + 802.11g + 802.11b Enter the 802.11 Mode for wireless connection. 26 ...
Page 28
WG‐500P Hotspot in a Printer Step 6: System Setting System Setting: WG‐500P allows to change the administrator’s Username and Password, and an NTP server setting. Figure 3‐1‐11 System Setting Screen Item Default Description Username admin Enter the user name. The user name can consist of up to 80 alphanumeric characters and is case sensitive. Password admin Enter the user password. The password can consist of up to 80 alphanumeric characters and is case sensitive.
WG‐ ‐500P Hotspot t in a Printer 32 Advan ced Setup e Advanced d Setting e enables yo u to confi igure adva nced settin ngs related d to acce essing the I nternet, inc cluding, THENTICAT AUTHE ENTICATION N RADIU US BILL LING BILLIN NG ...
No Authentication Subscriber can direct access the Internet without enter username and password. Built-in Authentication WG-500P provides “Built-in Authentication” for service provider to build up an Internet service without any extra authentication software. If “Built-in Authentication” is selected, service provider can generate the subscriber account inside the device, and the system will authenticate the subscriber login according to the generated account.
Page 31
WG‐500P Hotspot in a Printer redirect subscriber login page. Copy and paste the following HTML Code into your home page to produce user agreement login page. Figure 3‐2‐3 Preview Redirect Login Page Code Item Default Description Current User Information Backup 1 Min(s) The system provides automatically backup account information and unused account to flash ROM.
Subscriber can direct access the Internet without enter username and password. Enable (RADIUS Authentication) WG-500P provides “RADIUS Authentication” for service provider to build up an Internet service with RADIUS server. If RADIUS Authentication is enabled, all subscribers’ authentication will send to RADIUS Server by RADIUS protocol (RFC 2865, 2866).
Page 33
WG‐500P Hotspot in a Printer Accounting Port 1813 Enter the accounting port number; the accounting port number must match with the RADIUS server setting. The allowed numbers are from 0 to 65535. Share Secret Key Empty The share secret key, the key number also has to match with the Server setting.
WG‐500P Hotspot in a Printer 322 BILLING 3‐2‐2‐1 Billing The function is used to setup a billing profile. A billing profile is a description of how you want to charge your customer. Figure 3‐2‐5 Billing Setting Screen Item Default Description Enable Credit Card Service Disable Enables or disables the credit card service. Before you enable credit card service, make sure that your credit service is configured to work and the currency is American dollars.
Page 35
WG‐500P Hotspot in a Printer system can keep and accumulate every single usage time until the pre-defined usage time run out. Idle Time Out 5 Min(s) The idle time out valid range is 1-1440. If the idle time out is set as 5 minutes, it means if the account doesn’t send packet in 5 minutes, the account will logout automatically.
Page 36
WG‐500P Hotspot in a Printer Figure 3‐2‐6 Accumulation and Time to Finish Figure 3‐2‐7 Pre‐paid Procedure Diagram 35 ...
WG‐500P Hotspot in a Printer 3‐2‐2‐2 Accounting This function allow service provider to generate the subscriber accounts. Figure 3‐2‐8 Accounting Setting Screen Item Default Description Expiration Un-used account will be deleted 24 hours Enter the number of hours/minutes/days. The field maximum after ~hours automatically value is 30 hours/minutes/days. Accumulation account will be 3 months Enter the number and select time unit from list box.
Page 38
WG‐500P Hotspot in a Printer Figure 3‐2‐9 Account Process DiagramCan be replenished by subscriber=Enable Item Default Description Button A~C Define each button’s billing profile. Select one billing profile by clicking in the list box. Print to… Account Generator Printer Select a printer to print out your account. Use ~ for Discount Button A, Disable Select one button (A~C) by clicking in the list box to assign...
Page 39
WG‐500P Hotspot in a Printer Figure 3‐2‐11 Account Generator Printer (Time to Finish) Figure 3‐2‐12 Account Generator Printer (Accumulation) Note: Before configuring the accounting, you have to setting the billing profile of Web‐based account generator panel. 38 ...
Page 40
WG‐500P Hotspot in a Printer Example: If press 7 times Discount Price Plan based on “Button Presses” is disabled. Figure 3‐2‐13 Example 1 Amount: 7 x $2.00= $14.00 Figure 3‐2‐14 Account Printout 39 ...
Page 41
WG‐500P Hotspot in a Printer Discount Price Plan based on “Button Presses” is enabled. The Charge by level is disabled. Figure 3‐2‐15 Example 2 Amount: 7 x $ 1 = $ 7.00 Below is an example of the account printout. Figure 3‐2‐16 Account Printout 40 ...
Page 42
WG‐500P Hotspot in a Printer Discount Price Plan based on “Button Presses” is enabled. Charge by level is enabled. Figure 3‐2‐17 Example 3 Amount: 2 x $2.00 + 4 x$ 1.50+1x$1= $11.00 Below is an example of the account printout. Figure 3‐2‐18 Account Printout 41 ...
Page 43
WG‐500P Hotspot in a Printer Discount Price Plan based on “Button Presses” Figure 3‐2‐19 Discount Price Plan Setting Screen Item Default Description Charge by levels Enable Enables or disables the charge by levels function. 1‐10 Level This field displays the level number of charge rate. ...
Page 44
WG‐500P Hotspot in a Printer 3‐2‐2‐3 Credit Card WG‐500P provides three credit card services (Authorize.net, iValidate.net, Secure Pay, Paypal and WorldPay) that allow service provider to authorize, process, and manage credit transactions directly from Internet. Figure 3‐2‐20 Credit Card Setting Screen 43 ...
Page 45
WG‐500P Hotspot in a Printer Item Default Description Authorize.net Version This field displays the merchant version. Merchant ID Empty Enter your Merchant ID. This is a Merchant Identification Number that you’re received from your Merchant Provider. The maximum character of the Merchant ID is 50.
Page 46
WG‐500P Hotspot in a Printer merchant/processcc.a Secure Pay Merchant ID Empty Enter your Merchant ID. This is a Merchant Identification Number that you’re received from your Merchant Provider. The maximum character of the Merchant ID is 7. Secure Pay Address https://www.securepa Enter the address of SecurePay Payment Gateway.
Page 47
WG‐500P Hotspot in a Printer displayed on the login page Click Apply button to save the new settings and the success dialog box appears. Click on Back to return to Accounting setting screen. Note: Please leave the Administrator's Email address in Advanced/Syslog/Email portion. 46 ...
Syslog on LAN Server IP Address Empty Enter syslog server’s IP address. The WG-500P will send all of its logs to the specified syslog server. Server MAC Address Empty Enter the syslog server’s MAC address. The WG-500P will send all ...
Page 49
WG‐500P Hotspot in a Printer Item Default Description Syslog on WAN Server 1 IP Address Empty Enter IP address of first syslog server. Server 2 IP Address Empty Enter IP address of second syslog server. ...
Description System Device Information Every 10 minute(s) The range is 5~60 minutes. The log included system information would be sent according to specified interval time. Format: PRODUCT=WG-500P:VER=2.00.00;LOGNAME=DVI; DATE=07Mar26;TIME=11:30:00; WANMAC=09-00-0e-00-00-01;LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21; SYS_UP_TIME=14D23H34M21S;WANTXOK=99999; WANRXOK=99999;WANTXERROR=99999;WANRXERROR=99999; LANTXOK=99999;LANRXOK=99999;LANTXERROR=99999; LANRXERROR=99999;WIRELESSTXOK=99999;WIRELESSRXOK=99 999; WIRELESSTXERROR=99999;WIRELESSRXERROR=99999;...
Page 51
WG‐500P Hotspot in a Printer rebooted or restarted sent. Format: PRODUCT=WG-500P;VER=2.00.00;LOGNAME=SUN; DATE=07Mar26;TIME=15:23:32; WANMAC=09-00-0e-00-00-01;LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21; SYS_NAME=Cafehotspot;LOCATION=East;CITY=Taipei; COUNTRY=Taiwan; FIRMWARE=v1.01.02;MESSAGE=System_Up; Message = System_Reboot System Account Activity When system A log will be sent if system manager (Administrator) login Information manager login to or logout from the device orlogout Format:...
Page 52
USER_NUM=15;SEQ=1-5;USER_MAC=02-34-3e-01-00; User User Login When user logged-in A log including users information will be sent when user logged–in Format: PRODUCT=WG-500P;VER=2.00.00;LOGNAME=ULI;DATE=07Mar26; TIME=15:23:32;WANMAC=09-00-0e-00-00-01; LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21;USER_NAME=asdfg12;USER_IP=10.59.1. USER_MAC=02-34-3e-01-00;INTERFACE=Ethernet; USER_TYPE=Dynamic; User Type = Dynamic / Super / User Agreement / Radius / No-Auth When User Replenish login format: PRODUCT=WG-500P;VER=2.00.00;LOGNAME=URP;DATE=07Mar26;...
Page 53
User Type = Dynamic / Super / User Agreement / Radius / No-Auth Current User List Every 10 minute(s) The range is Range 5~60 minutes. A log including logged-in users information will be sent according to specified interval time Format: PRODUCT=WG-500P;VER=2.00.00;LOGNAME=CUL;DATE=07Mar26; TIME=15:23:32;WANMAC=09-00-0e-00-00-01; LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21;USER_NUM=0;SEQ=1-5; USER_NAME=asdfg12,USER_IP=10.59.1.2,USER_MAC=02-34-3e-01- INTERFACE=Ethernet,USER_TYPE=Dynamic,RXDATA=1234, TXDATA=1234,USED_TIME=24:00:00,SESSION=100,WLAN_SIG=N/A;...
Page 54
WG‐500P Hotspot in a Printer PRODUCT=WG-500P;VER=2.00.00;LOGNAME=BLA; DATE=07Mar26; TIME=15:23:32;WANMAC=09-00-0e-00-00-01; LANMAC=09-00-0e-00-00-02; WLANMAC=09-00-0e-00-00-03; IP_ADDRESS=210.66.37.21;USER_NAME=username; BILL_TYPE=Cash, BILL_AMOUNT= USD50.00 Billing Type= Cash | Credit_Card; Billing Amount = xx.xx Currency = AUD | CHF | EUR | GBP | JPY | RIY | USD…… Click Apply button to save the new settings and the success dialog box appears. Click on Back to return to Logs setting screen. 3‐2‐3‐2 Session Trace Session Trace is an intelligent function to help service provider to trace every user’s ...
Page 55
WG‐500P Hotspot in a Printer Item Default Description TFTP Server Session Trace Disable Disables or enables session trace function. Primary TFTP Server IP Empty Enter the IP address of the primary TFTP server. Address Secondary TFTP Server IP Empty Enter the IP address of the second TFTP server.
WG‐500P Hotspot in a Printer 3‐2‐3‐3 Bandwidth The function enables administrator to limit bandwidth usage on a per user basis (MAC address). That prevents users from consuming a disproportionately large amount of bandwidth so every user gets a fair share of the available bandwidth. Figure 3‐2‐24 Bandwidth Setting Screen Item Default Description Bandwidth Disable Enables or disables Bandwidth Management.
WG‐500P Hotspot in a Printer 3‐2‐3‐4 SNMP The SNMP Agent Configuration screen enables you to access to your device via Simple Network Management Protocol. If you are not familiar with SNMP, please consult your Network Administrator or consult SNMP reference material. You must first enable SNMP on the SNMP Agent Configuration screen. Figure 3‐2‐25 SNMP Setting Screen Item Default Description ...
Enter the URL Page; please use this format such like “http://www.yahoo.com”. The maximum character of the URL Page is 50. Note: Please add www.apple.com into PASS THROUGH list in WG-500P. (iOS 6 device and later is required.) Please add go.redirectingat.com for certain QR code apps. 57 ...
Page 59
Mask Empty Enter the subnet mask of you wants pass through. Pass Through List Display the pass through Information of WG-500P. The index number of pass through address. Active Disable Click on check box, active or inactive the pass through address.
WG‐500P Hotspot in a Printer 3‐2‐4‐2 Filtering Filtering allows the system administrator to have a list of restricted destinations, which is useful to block specified Internet websites or Intranet areas. Figure 3‐2‐27 Filtering Setting Screen Item Default Description Filtering Disable Enables or disables filtering function. HTTP Message to display The Web Site is Enter the http message.