Handlink Technologies WG-500P User Manual page 28

WG‐500P Hotspot in a Printer
Step 6: System Setting
System Setting: WG‐500P allows to change the administrator's Username and
Password, and an NTP server setting.
Item
Username admin
Password admin
Time Zone GMT
Manual Setting YYYY/MM/DD
HH:MM:SS
NTP Setting
Secure Administrator All
IP Address
Click FINISH button to save the settings then the system will restart.
Figure 3‐1‐11 System Setting Screen
Default
Enter the user name. The user name can consist of up to 80
alphanumeric characters and is case sensitive.
Enter the user password. The password can consist of up to 80
alphanumeric characters and is case sensitive.
Enter the Time Zone for the system.
Click Manual Setting to set the system date and time.
Click Update button to correct the system date and time.
This function allows remote user to management the device. You can
specify one or any IP addresses for remote control the system.
Description
27