VarTech Systems VTPC190VR User Manual page 6

Installation of Your Enclosed VESA Mount PC
Packaged with each carton will be:
1-VTPC190VR/VSR
1-AC Power Cable
1-LAN Male Cable
2-RS232 Male Cables
3-USB Cables
1-Users Guide (Printed or on CD)
BEFORE MAKING ANY CONNECTIONS OR APPLYING POWER,
FIRST READ THROUGH THE ENTIRE MANUAL
Mounting Procedure
VESA Panel Mounting Procedure:
1- Install the enclosure to a 100mm VESA mount pedestal.
2- Secure the enclosure using the screws and lock washers, supplied
with the unit.
3- Tighten all mounting hardware to a torque of 15 inch-pounds.
ATTENTION: Mounting hardware must be tightened to a torque of 15
inch-pounds to provide a proper panel mount and avoid potential damage.
Vartech Systems assumes no responsibility for water or chemical damage
to the monitor or other equipment within the enclosure due to improper
installation.
4- Attach the power and system cables to the bottom side of the
enclosure if you have not already done so.
19.0" Enclosed VESA Mount PC User's Guide Page 6