List Of Parameters - Pfaff 3371-10 SERIES Adjustment Manual

15

List of parameters

.33
Group
000
Parameter Description
001 Maximum speed
This parameter is used to fix the max.
sewing speed (upper limit).
002 Sewing speed for start stitches
With this parameter the speeds for
the 5 start stitches are fixed.
Speed (spm) for start stitch no. 1
Speed (spm) for start stitch no. 2
Speed (spm) for start stitch no. 3
Speed (spm) for start stitch no. 4
Speed (spm) for start stitch no. 5
003 Locking/releasing seam patterns
This parameter is used to release (ON)
or lock (OFF) the individual seam
patterns (0 to 99) to be carried out in
the sewing mode.
004 Switch bobbin thread counter on/off
Standard value (pieces per bobbin)
In the sewing mode, the bobbin thread
counter counts the pieces sewn
backwards from the standard value.
If the bobbin thread counter is
switched on, in the sewing mode a
signal is given when the value 0 is
reached.
005 Sequence combination
This parameter is used to combine
several sequences with each other.
0 = no combination
1 = C1 with C2
2 = C2 with C3
3 = C1 with C3
4 = C1 with C2 and C3
006 Reversing after thread trimming
Reverse position [°]
With this parameter it is possible to
switch the automatic reversing function
after thread trimming on or off. If the
reversing function is switched on, the
reverse position can be set by turning
the balance wheel. The access code is
necessary for this adjustment.
Adjustment
Setting Set value
range
500 – 2500 2500
500 – 2500 500
500 – 2500 900
500 – 2500 2500
500 – 2500 2500
500 – 2500 2500
ON – OFF ON
ON – OFF OFF
1 - 9999
0 - 4 0
ON – OFF OFF
0 – 14 11
32