Adjustment
15
Changing the feeder and the jaws of the button clamp
.30
● Measure the cutout of the new feeder in X- and Y-direction and adjust the sewing area
● Fit and align the new button clamp jaws, see Chapter 15.08 Aligning the button clamp.
● Select the seam program to match the button clamp, see Chapter 9.06 Selecting a
● Check the seam program by tacting through it, see Chapter 7.05.03 Function keys of
29
1
Fig. 15 - 26
size, see Chapter 9.07 Button clamp and sewing area size of the instruction manual.
seam program of the instruction manual.
the instruction manual.
If the actual size of the sewing area differs from the size entered, serious
damage can be caused to the machine!