Base Settings; Set The Flash Time; Change The System Pin Code; Set Eco Mode - VTech FS6414-A User Manual

6.4

Base Settings

6.4.1

Set the Flash Time

unlikely that you should need to change this setting unless advised to do so.
1. Press MENU then
2. Press OK then
3. Press OK then
4. Press OK
6.4.2

Change the System PIN Code

A 4-digit system PIN code is used for changing the system settings of the base station. It is
used to protect your phone against unauthorized use. The default system PIN code is 0000.
1. Press MENU then
2. Press OK then
3. Press OK.
4. Enter the old system PIN.
5. Press OK then enter the new system PIN.
6. Press OK then enter the new system PIN again.
7. Press OK
6.4.3

Set ECO mode

When ECO mode is set to ON, the radiation, as well as the transmission range, will be
halved.
1. Press MENU when the handset is not in use.
2. Press to scroll to BS SETTINGS.
3. Press OK and
4. Press OK and
5. Press OK
6.5

Reset Your Phone

You can reset your phone to the default settings. After reset, all your personal settings, call
list entries and redial list entries will be deleted, but your phonebook remains unchanged.
1. Press MENU then
2. Press OK.
3. Enter the 4-digit system PIN.
4. Press OK
5. Press OK
to select BS SETTINGS.
to select DIAL MODE.
to select SHORT, MEDIUM or LONG.
to select BS SETTINGS.
to select CHANGE PIN.
to scroll to ECO MODE.
to select the ON or OFF.
to select DEFAULT.
27
CONFIRM?" .