Display Connections - Motorola MW 800 Owner's Manual

Display Connections

Connector
Display Power
Display In
USB 1 & USB 2 Ports
touchscreen calibration, see "Calibrating the Touchscreen", on
page 48.
A screen saver should be used.
Note
Do not display a single image on screen for an extended
!
period of time.
Caution
The rear panel of the display shows the following connectors:
Figure 6
Display - Connectors
Description
DC connector for vehicle. Requires a standard Motorola
power cable with 15 A fuse
RGB, USB and Sound from workstation
USB 1 to Keyboard and USB 2 to any peripheral device.
(Note that all full-speed USB devices must be connected
directly to the USB port, on the workstation)
Display Power
Display Unit Overview
USB Port 1
Display In
USB Port 2
11