Standard Display Cable Adaptor; Mw 800 Display Installation - Motorola MW 800 Owner's Manual

12 MW 800 Display Owner's Manual

Standard Display Cable Adaptor

RGB Connector
USB Connector
Speaker
Connector
Mic Connector

MW 800 Display Installation

The standard display cable adaptor enables to interface any standard
screen to the workstation. The adapter connects to the Display-CPU
cable.
The standard display cable adaptor is shown in the figure below
Figure 7
Standard Display Cable Adaptor
The MW 800 display is attached to any display mount by Phillips
screws, supplied in the display shipping carton. The display cable
from the workstation is routed through the mount and connected to
the lower back side of the display. Use caution when assembling the
cable to the display to prevent damage to the display or the cable.
All display options have an additional power cable that must be used
to supply power to the display. The display Power cable must be
protected by 15A fuse.
Power Cable
Cable Adaptor
USB Cables
Display Cable