Display Indicators - Motorola MW 800 Owner's Manual

Display Indicators

Button
Backlight
Brightness
Volume
User-defined
Emergency
The indicator LEDs located on the display unit show the MW 800
Display status, as described in the following table:
LED
Power
(green)
Temperature
(red)
Description
To toggle between backlight on and off. Set
the desired backlight brightness, using the
Brightness button
Tap the upper arrow to increase or the lower
arrow to decrease the on-screen light level.
You may tap up to 32 continuous linear
brightness levels.
You can control the brightness only if the
backlight is turned on (Backlight LED is off)
Tap the upper arrow to increase or the lower
arrow to decrease the speaker's volume
level. You may tap up to 64 continuous linear
volume levels
To carry out specific functions, depending on
specific user application
To send an emergency message to the RF
host computer. The Emergency button will
be functional as soon as you power the
workstation.
(This key functionality depends on the
definition given by each user system and the
active application)
Description
On: System is on.
Blinking: The vehicle battery is discharged.
Off: System is off, or the terminal is in
Suspend mode
Blinking: CPU or display unit temperature is
out of range. For more information,
refer to "Powering On in Extreme
Temperature Conditions", on
page 14
Off: Normal operation
Display Unit Overview 9