Page 2
All rights reserved. No part of this Document may be reproduced, transmitted, transcribed, stored (in a retrieval system or otherwise) or translated into any language, in any form or by any means (electronic, mechanical, magnetic, optical, manual or otherwise) without the prior written permission of Elcometer Limited. Doc.No. TMA-0451 Issue 02...
Our products cover all aspects of coating inspection, from development through application to post application inspection. This Elcometer 1700 Falling Sand Tester is a world beating product. With the purchase of this product you now have access to the worldwide service and support network of Elcometer. For more information visit our website at www.elcometer.com...
1.1 STANDARDS The Elcometer 1700 can be used in accordance with the following standards: • ASTM D 968-3 supercedes FTMS 141 6191 • DIN 53233 • JIS A 1452 • JIS H 8682-3 • NF J17-093 (obsolete) 2 GETTING STARTED 1.
A replacement tube is available from your local Elcometer supplier or directly from Elcometer. In the unlikely event of a fault, the instrument should be returned to your local Elcometer supplier or directly to Elcometer.
6 RELATED EQUIPMENT Elcometer produces a wide range of washability and abrasion instruments and associated inspection equipment. Users of the Elcometer 1700 Falling Sand Tester may also benefit from the following Elcometer products : • Elcometer 456 Coating Thickness Gauge •...