Subscribe to Our Youtube Channel
Related Manuals for Rear view safety RVS-4CAM
Summary of Contents for Rear view safety RVS-4CAM
- Page 1 Instruction Manual Wireless Backup Camera System 7" Quad View Display with Built-in DVR RVS-4CAM...
-
Page 2: Table Of Contents
In The Box For Standard RVS-4CAM 1 x Color CCD Infra-Red Weatherproof Wireless Backup Camera 1 x 7" Quad View Monitor With Built-In DVR and Sunshade 1 x Universal Mount With Adhesive Pad 3 x Wireless Antennas 1 x Remote Control... -
Page 3: Introduction
NOTE! Please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty. Congratulations on purchasing a Rear View Backup Camera System! With this manual you will be able to properly install and operate the unit. The Backup Camera System is intended to be installed as a supplement aid to your standard rear view mirror that already exists in your vehicle. -
Page 4: Safety Information
Rear View Camera System. If you back up while looking only at the monitor, you may cause Rear View Safety... - Page 5 INSTALLATION: • Electric shock or product or disconnected wire may cause a malfunction may occur if this fire. product is installed incorrectly. • While installing the Rear View System be careful with the wire • Use this product within positioning in order to avoid wire the voltage range specified.
- Page 6 IN NO EVENT SHALL SELLER OR MANUFACTURER BE LIABLE FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT. Rear View Safety...
-
Page 7: Before Beginning Installation
Before drilling please check that no cable or wiring is on the other side of the wall. Please clamp all wires securely to reduce the possibility of them being damaged while vehicle is in use. Keep all cables away from hot/moving parts and electrical noisy components. We recommend doing a benchmark test before installation to insure that all components are working properly. -
Page 8: Precautions
Never try to repair this device yourself. If any problems occur, immediately turn the display off and notify our company or an authorized dealer. Any disassembly or modification may lead to damage and will also void the warranty. Rear View Safety... -
Page 9: Monitor Specification
Monitor Specification • Supports both NTSC and PAL video systems • Supports 4 cameras with 3 trigger wires. Image automatically switches to respective camera once trigger is activated • Display effect/volume can be changed for each individual camera • Grid lines (can be switched on/off) •... -
Page 10: Monitor Buttons
Monitor Buttons Menu/Select Rear View Safety... -
Page 11: Camera Specification
Camera Specification Camera Type 1/4" Sharp® Color CCD Picture Elements 250,000 pixels Gamma Correction r=0.45 to 1.0 Viewing Angle 130° Image Sensor 540 TV lines PAL: 752 (H) x 582 (V), NTSC: 769 (H) x 494 (V) Lens 2.1mm Waterproof Rating IP68 View Angle 130°... -
Page 12: System Placement
Placement Rear View Safety... -
Page 13: Connection
Transmitter for optional side camera OPERATION GUIDE 1. The monitor will automatically turn on when connected to a power source. If it is not connected to a camera, it will automatically turn off after 3 seconds. 2. Image will automatically appear on the screen when a trigger is activated. -
Page 14: User Interface
2. Press the "PAIR" button on the camera/transmitter 3. On the monitor select the desired camera, it will pair automatically 4. "PAIR OK" will appear on the screen after a sucessful pairing. If "TIME OUT" displays, try pairing again Rear View Safety... - Page 15 Image select Reversal...
- Page 16 Setting select Rear View Safety...
Need help?
Do you have a question about the RVS-4CAM and is the answer not in the manual?
Questions and answers