Rear view safety RVS-776718-BT Instruction Manual

G-series backup camera system with bluetooth
Hide thumbs Also See for RVS-776718-BT:

Advertisement

Quick Links

Instruction Manual
G-SERIES Backup Camera System with Bluetooth
RVS-776718-BT

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RVS-776718-BT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Rear view safety RVS-776718-BT

  • Page 1 Instruction Manual G-SERIES Backup Camera System with Bluetooth RVS-776718-BT...
  • Page 2 Monitor Brightness......20 Troubleshooting......21 Rear View Safety Reverse With Confidence ™...
  • Page 3 System. If you back up while looking a metal case, cover the cable with • Dropping the unit may cause only at the monitor, you may cause friction tape. A short circuit possible mechanical failure. Rear View Safety Reverse With Confidence ™...
  • Page 4 Step 3: Once all cables and wiring have been properly routed, perform a system function test by temporarily connecting the system. If the system seems to not be operating properly see troubleshooting (page 21). Rear View Safety Reverse With Confidence ™...
  • Page 5 Fasten all cables and secure all excess cable. Connect camera to the • Feed as much cable as possible into vehicle & clamp securely. This reduces the possibility of cable being hooked or snagged. camera extension cable which runs inside the vehicle. Figure 1.2 Rear View Safety Reverse With Confidence ™...
  • Page 6 FIGURE 1.1 FIGURE 2.2 FIGURE 1.2 Rear View Safety Reverse With Confidence ™...
  • Page 7: Figure

    Pixel Pitch (mm) 0.219x0.219 2. YELLOW- Video Power Consumption: 3. GREEN- Mirror / Normal Imaging Working Voltage: DC 9V-32V 4. WHITE- Audio Video Input: NTFS/PAL Video input 5. BLACK- Ground (-) Signal System: PAL/Auto/NTSC Rear View Safety Reverse With Confidence ™...
  • Page 8: Camera Installation

    About Camera Camera Installation SPECIFICATIONS: Mounting Position view angle installation position º Rear View Safety Reverse With Confidence ™...
  • Page 9: Grid Lines

    It is easy to operate and calibrate. Accuracy The accuracy of the grid-lines can vary based on how you angle your cam- era. Therefore to compensate for inaccurancies, you can adjust the grid- lines to your camera angle. Rear View Safety Reverse With Confidence ™...
  • Page 10: Bluetooth Connection

    This indicates a sucessful connection. After 5 seconds, the bile phone or other device to the rear view mirror. monitor will automatically shut off and the Bluetooth system will enter a standby mode. Rear View Safety Reverse With Confidence ™...
  • Page 11: Monitor Brightness

    Verify green trigger is receiving power Auto Brightness Adjustment Your system will automatically adjust monitor brightness based on ambient light. The monitor will be comfortably visable in both bright sunshine and the darkness of night. Rear View Safety Reverse With Confidence ™...

Table of Contents