Table of Contents
Advertisement
(5) Installing the SATA controller driver during the OS installation
Now, the SATA driver disk is ready, and BIOS settings configured, you can proceed to install
Windows 2000/XP onto your SATA hard drive using the SATA driver. Here is an example for
Windows XP installation.
(5)-1
Restart your system to boot the Windows 2000/XP Setup disk, and press F6 button
as soon as you see the message "Press F6 if you need to install a 3rd party SCSI or
RAID driver". After pressing the F6 button, there will be a few moments for some
files being loaded before next screen appears.
(5)-2
When you see the screen below, insert the floppy disk containing the SATA driver
and press "S".
Configuring SATA for RAID Function
SHB102 LGA775 SBC User's Manual
93
Advertisement
Table of Contents
Need help?
Do you have a question about the SHB102 and is the answer not in the manual?