Toshiba teli DU1207MCG Instruction Manual page 101

● GenICam Node
Name
LineMode
LineModeAll
LineInverter
LineInverterAll
LineStatus
LineStatusAll
UserOutputValue
UserOutputValueAll
LineSelector
LineSource
● IIDC2 Register
Register Field
LineModeAll Implemented
BitWritable
Value
LineInverterAll Implemented
Value
LineStatusAll Implemented
Value
UserOutputValueAll Implemented
Value
LineSelector Implemented
Value
LineSource Implemented
ListOfElements
Value
Copyright © 2017 TOSHIBA TELI CORPORATION, All rights reserved.
Length
Interface
Byte / [bit]
IEnumeration 4
IInteger 4
IBoolean 4
IInteger 4
IBoolean 4
IInteger 4
IBoolean 4
IInteger 4
IEnumeration 4
IEnumeration 4
Length
Address
Byte / [bit]
0x209020 [31]
0x20902C 4
0x209030 4
0x209040 [31]
0x209050 4
0x209060 [31]
0x209070 4
0x209080 [31]
0x209090 4
0x2090A0 [31]
0x2090BC 4
0x2090C0 [31]
0x2090CC 4
0x2090DC 4
100 / 179
Access
R/W Selects the Input / Output of each Line selected by LineSelector.
R/W Selects the Input / Output of each Line.
R/W Selects the polarity of each Line signal selected by LineSelector.
R/W Selects the polarity of each Line signal.
R Returns the status of each Line signal selected by LineSelector.
R Returns the status of each Line signal.
R/W Sets the user output value of each line selected by LineSelector.
R/W Sets the user output value of each Line.
R/W Selects the Line of I/O connector.
R/W Selects the source of the output signal.
Access
R Returns the state whether the function is implemented.
R [0]: Line0
[1]: Line1
[2]: Line2
R/W Selects the direction of each line signal.
R Returns the state whether the function is implemented.
R/W Selects the inversion of I/O lines.
Reflected both input and output buffers.
R Returns the state whether the function is implemented.
R Returns the current status of all I/O lines.
R Returns the state whether the function is implemented.
R/W Selects the output value.
R Returns the state whether the function is implemented.
R/W Selects the I/O line to output LineSource.
R Returns the state whether the function is implemented.
R [0] : Off
[32] : UserOutput
[64] : Timer0Active
[99] : AcquisitionActive
[106] : FrameTriggerWait
[107] : FrameActive
[115] : FrameTransferActive
[123] : ExposureActive
R/W Selects the source signal.
Description
Description
D4267042B
http://www.toshiba-teli.co.jp/en/