Test Result (-P Only) - Fluke 9190A Operator's Manual

9190A
Operators Manual
Item
DIRECTION controls whether the SETPOINTS are sequenced in one direction "→" (ascending
from 1 to 8) or in both directions "  " (ascending from 1 to 8 and then descending from 8 to 1)
before the sequence is repeated. If the both directions option is selected, the Program sequences

from the first SETPOINT to the last and then reverses direction sequencing from the last to the
first.
PASS TOLERANCE

test points that have large errors.
SETPOINTS MENU opens a menu to set each of the SETPOINTS for the Program. Only the

number of SETPOINTS defined by NO. SETPOINTS will be displayed.

Test Result (-P Only)

Table 2-14 shows and describes the menu selections on the Test Result menu. This menu
is available on the -P Model only.
MENU
Item
VIEW TEST

PRINT TEST
printed. The data is transmitted from the RS-232 or USB port in ASCII format. Terminal emulator

or other software can be used to receive the data and save it to a text file on a computer.
ERASE TESTS

2-16
Table 2-13. Ramp/Soak Setup Menu (cont.)
[-P Only]
is the allowable tolerance condition for the test and is used to highlight
Table 2-14. Test Result Menu
P R O G T E S T
MENU R E S U L T
[-P Only]
opens a menu where test results can be viewed.
[-P Only]
opens a menu to select a programs results and transmit them to a PC to be
[-P Only]
opens a menu to erase test results.
Function
66.03°C
T E S T R E S U L T M E N U
V I E W P R I N T
T E S T T E S T
1
Function
E R A S E
T E S T
2 3
gzs012.eps