Message Waiting; Paging The Handset - Curtis TC970 Manual

Caller ID System Operation

Message Waiting

If you subscribe to voice mail from the telephone
company and if there are voice messages that have
been left in your voice mailbox, the display will show
"MSG WAITING"
Note: This function requires voice mail subscription from the local telephone company.
Furthermore, the local phone company must provide a type of voice mail sig-
naling called "FSK" (Frequency Shift key) Not all telephone companies have
the visual message waiting feature available. Please contact your local tele-
phone company to check if this is available in your area.
If you wish to delete the "Message Waiting" message, delete it as described in
the handset setting section "Deleting the Message Waiting Indication".

Paging the Handset

Press the PAGE button on the base unit. If the handset is within range, the hand-
1.
set will beep for 20 seconds.
To stop the beeping, place the handset back into the base cradle or press the
2.
TALK button on the handset.
Out-of-Range Warning
If you venture too far from the base, the handset will beep and the display will show
"OUT RANGE". Reverse your direction to re-establish connection with the base or
the call will be dropped. When the base detects that the handset has been out of
range for 20 continuous seconds it will release the engaged line. If you try to access
the line when the handset is out of range of the base, the display will show "TRAY
AGAIN".
Channel Changing
If you are experiencing interference during a telephone call, press the SCAN button to
select the clearest channel to provide the best possible reception.
TC970 MAUNAL black.p65
29
29 02-5-22, 9:40