Desk And Wall Mounting - Curtis TC970 Manual

Desk and Wall Mounting

Desk Mounting
One of the special features of your telephone is the unique design of the MOUNTING BRACKET
which can hold your phone at an angle of 30 when desk mounting. There are two position to
choose from:
1. NORMAL POSITION (MOUNTING BRACKET not required):
For normal position, place the base unit on any desired but suitable location.
2. 30 POSITION (See Figure 1):
With the back of the base unit facing up, insert the hooks of the MOUNTING BRACKET
(following the arrow direction for the DESK MOUNT) into the matching slots of the base
unit. Then slide the MOUNTING BRACKET into place as indicated by the arrow.
Figure 1
Wall Mounting (See Figure 2)
You may choose to put the base unit of your cordless telephone on a wall.
1. With the back of the base unit facing up, connect SHORT TELEPHONE LINE CORD to
the TELEPHONE LINE CONNECTION JACK.
2. Insert the free end of the SHORT TELEPHONE LINE CORD through the hole of the
MOUNTING BRACKET.
3. Insert the hooks of the MOUNTING BRACKET (following the arrow direction for the WALL
MOUNT) into the matching slots of the base unit. Then slide the MOUNTING BRACKET
into place as indicated by the arrow. Plug the free end of the SHORT TELEPHONE LINE
CORD into the MODULAR WALL JACK.
4. Align the upper keyhole on the MOUNTING BRACKET with the upper stud of the wall
plate, so that the opening end of the MOUNTING BRACKET matches the lower stud, then
pull the base unit down until it is securely seated.
TC970 MAUNAL black.p65
TEL 9VDC 300mA
BASE UNIT
(SIDE VIEW)
10
10
WALL
MOUNT
STUD
MODULAR
WALL
JACK
WALL
MOUNT
STUD
BASE UNIT
(SIDE VIEW)
WALL MOUNT BRACKET
Figure 2
02-5-22, 9:37
SCREWS
WALL MOUNT
BRACKET