Table of Contents
Advertisement
Caller ID System Operation
Editing a Stored Number
1.
Press the SAVE/MEM button.
2.
Press the UP or DOWN button to find the desired number.
3.
Press the FLASH/EDIT button. The entry will display with a flashing prompt over the
first character.
4.
Move the cursor to the section you wish to edit using the UP, DOWN, {
{ / } buttons. When moving through the number field, it will be necessary to press
and hold the {
moves. Any dial key pressed will be inserted in front of the cursor.
5.
To delete a character, press the DEL/RE/PA button. to delete a number, press and
hold the DEL/RE/PA button for more than one second until the number is deleted.
6.
When you are finished, press the SAVE/MEM button to store the edited record.
Preferred Calls
You can assign stored numbers as preferred calls. When an incoming call is matched to a
stored number designated as "VIP", the phone will generate a special ringer sound after
the first ring (caller ID information must be received first).
1.
Press the SAVE/MEM button.
2.
Press the UP or DOWN button to find the
desired record.
3.
Press the PROG/MUTE button once. The
LCD will show the "VIP" icon.
4.
Press the SAVE/MEM button to exit the
phone book.
Block Calls
If you do not want to have the phone ring when a specific number calls, you can
store that number in the phone book and assigned it as blocked. When an incoming
call is matched to a stored number designated as "REJ", the phone will cut the ringer
sound after the first ring (caller ID information must be received first).
1.
Press the SAVE/MEM button.
Press the UP or DOWN button to find the de-
2.
sired record
Press the PROG/MUTE button twice. The LCD
3.
will show the "REJ" icon.
Press the SAVE/MEM button to exit the phone
4.
book.
TC970 MAUNAL black.p65
/
}, and {
/
} buttons for more than one second until the cursor
24
24
/
}, and
02-5-22, 9:40
Advertisement
Table of Contents
