Setting The Time And Date; Setting The Area Code - Curtis TC970 Manual

Caller ID System Operation

Setting the Time and Date

1. Press the PROG/MUTE button to enter the menu.
Press the {3 DEF} button to go to the time set programming option.
2.
3. Press the FLASH/EDIT button to change the setting. the month will begin flashing.
4. Use the dial pad to enter the month in two-digit format. The date will begin flashing.
Use the dial pad to enter the date in two-digit format. The hour will begin flashing.
5.
Use the dial pad to enter the hour in two-digit format. The minutes will begin flashing.
6.
Use the dial pad to enter the minutes in two-digit format. AM and PM will begin flashing.
7.
Use the dial pad to choose between AM and PM, where {1} is AM and {2 ABC} is PM.
8.
When the final setting is programmed, the time and date are automatically saved. A
9.
double beep will sound and you are returned to the options menu.
Continue with programming or press the PROG/MUTE button to return to the idle
10.
screen.

Setting the Area Code

1. Press the PROG/MUTE button to enter the menu.
2.
Press the {4 GHI} to go to the area code programming option.
3. Press the FLASH/EDIT button to change the setting. "----" will begin flashing.
4. Use the dial pad to enter the three digit area code that your phone number begins
with.
5.
When the setting you desire is displayed, press the SAVE/MEM button to save the
setting. A double beep will sound to confirm the setting has been saved.
6.
Continue with programming or press the PROG/MUTE button to return to the idle
screen.
Note: Do not use the AREA CODE programming if you are required to dial 10 digits (xxx-
xxx-xxxx) to dial a local number.
TC970 MAUNAL black.p65
17
17 02-5-22, 9:38