Turning The Pbx Mode On Or Off; Changing The Pause Time - Curtis TC970 Manual

Caller ID System Operation

Turning the PBX Mode On or Off

1.
Press the PROG/MUTE button to enter the menu.
2.
Press the {7 PQRS} key to go to the PBX mode programming option.
3.
Press the FLASH/EDIT button to change the setting. "OFF" will flash.
4.
Press the UP or DOWN button to toggle between On and Off.
5.
When the setting you desire is displayed, press the SAVE/MEM button to save the
setting. A double beep will sound to confirm the setting has been saved.
6.
Continue with programming or press the PROG/MUTE button to return to the idle
screen.
Note: You do not need PBX mode unless you need to dial a specific single digit number
before each outgoing call.

Changing the Pause Time

1.
Press the PROG/MUTE button to enter the menu.
2.
Press the {8 TUV} key to go to the pause time programming option.
3.
Press the FLASH/EDIT button to change the setting. "2" will begin flashing.
4.
Press the UP or DOWN button to select the desired dialing delay.
5.
When the setting you desire is displayed, press the SAVE/MEM button to save the
setting. A double beep will sound to confirm the setting has been saved.
6.
Continue with programming or press the PROG/MUTE button to return to the idle
screen.
TC970 MAUNAL black.p65
19
19 02-5-22, 9:39