Caller Id With Call Waiting Service - Curtis TC970 Manual

Caller ID System Operation

Caller ID with Call Waiting Service

In order to use the "Call Waiting Caller ID" service you must subscribe to a telephone com-
pany that offers Caller ID service combined with "call waiting" service.
When a new call comes in while you are talking, you
will hear a notification beep from the handset and the
volume is momentarily muted. The new caller's name
and phone number, if available, appears on the
display. Once flash has been pressed, an "L2" in the
lower right hand corner indicates the call waiting caller
ID caller so you can keep track of who you are talk-
ing to.
1. When you receive a "call waiting" call and you want to connect the call, press the
FLASH/EDIT button. The active call will be placed on hold and the new call will be active.
2. Press FLASH/EDIT button to alternate between calls.
3. Press TALK button to end the call or place the handset back on the base.
TC970 MAUNAL black.p65
"PRIVATE" will be shown when a call is received from a blocked
number. For privacy reasons, some states allow callers the op-
tion to prevent their telephone data from being displayed on the
other party's Caller ID display.
Display shows when the Caller ID information was received in-
correctly or only part of the data was received.
Note: When an error is received, none of the data from this call
is saved in memory.
Display shows when a voice mail message has been received
and is stored by message waiting service provided by the phone
company.
Display shows when the incoming call is a priority call.
This is displayed when CALLS button is pressed and there is no
Caller ID data stored.
26
26 02-5-22, 9:40