Cordless Telephone Operation; Preparing For Use; Receiving Calls - Curtis TC970 Manual

Cordless Telephone Operation

Preparing for Use

Before you can use your cordless telephone, you must charge the handset for 12 hours.
Failure to do so will require recharging of the battery more often.
1.
Place the handset on the base unit for 12 hours.
2.
After 12 hours, remove the handset from the base unit.
3.
Raise or reposition the base unit antenna for the best reception.
Before you can use your cordless telephone, you must charge the handset for
12 hours. Failure to do so will require more frequent charging of the battery.
NOTE:
Depending on the frequency of use, once the handset is fully charged, it remains func-
tional for approximately 4 hours of continuous use and approximately 5 days when the
handset is off the BASE UNIT in STANDBY mode.

Receiving Calls

If the handset is in the base, lift the handset and
1.
it will automatically turn ON. This auto-answer
feature can be programmed OFF (see handset
settings).
If the handset is off the base, the display will show
2.
"RING". If you have Caller ID, the display will show
the Caller ID information after the first ring.
3. Press the TALK button.
4. To end your conversation, either press the TALK
button or place the handset on the base unit.
NOTE:
The Call Timer will start to count once you press the TALK button.
TC970 MAUNAL black.p65
11
11 02-5-22, 9:38