Table of Contents
Advertisement
WP
PotentiaMeter
4C
3. Getting Started
Lid thumb-screw
RS-232 interface
Fan
Power cord
Plug
fuse well
ON/OFF Switch
Back view of WP4C
Preparing the WP4C for Operation
After finding a good location for your WP4C, plug the
power cord to the back of the unit. Before turning it on,
pull open the sample drawer (turn the knob to the
"OPEN/LOAD" position). An empty disposable sample
cup is usually placed upside-down in the drawer to protect
it during shipment. Remove this sample cup and turn the
instrument on. The ON/OFF switch is located on the
lower right corner of the WP4C's back panel. The follow-
ing screens will appear on the LCD:
PotentiaMeter
Model WP4C
v4.03
9
Advertisement
Table of Contents
