Installation
Electrical Interface
2.5.
Electrical Interface
2.5.1. Connector and Pin Assignment (AR620X and RT6201)
Antenna Connector (Position 1)
The antenna connector (Figure 2-14, position 1) is a BNC type. The antenna port designed for
operating with a nominal impedance of 50 Ω.
Grounding Bolt (Position 2)
The transceiver has a M4 threaded grounding bolt (Figure 2-14,position 2) allowing a low impedance
grounding of the unit, which is essential to avoid damage or malfunction in the case of indirect
lightning, EMI and HIRF conditions.
Figure 2-14: Rear plate AR6201 and RT6201, connectors P1 (male) and J1 (female)
Figure 2-15: Rear plate AR6203, connectors P1 (male) and J1 (female)
44
Transceiver Family 620X
DV14307.03 Issue 04 March 2016