1-7. Toolpak Accessory Kit
The QuickBERT-T1 and QuickCHECK-T1 come with a ToolPak accessories
kit. This kit includes a universal hanger, hook-and-loop straps, and a magnet.
The universal hanger attaches to the unit and can be used by itself on a nail or
hook, with a piece of rope or stiff wire. Two hook-and-loop straps are used
with the universal hanger and can be wrapped around a pipe or beam. The
ToolPak's magnet is used with the universal hanger and is strong enough to
securely hold the test set.
Hanger inserts
into slot with tab
extension facing
out, for proper use.
Figure 1-3. ToolPak Accessory Kit
Introduction
Toolpak Accessory Kit
1
abn03f.eps
1-5