1-3. Safety Information
To avoid possible electric shock or personal injury, and to
avoid possible damage to the Test Set or to the equipment
under test, follow these guidelines:
•
Before using the Test Set inspect the case. Do not use the Test Set if it is
damaged.
•
Inspect the test cables for damaged insulation or exposed metal. Check the
cables for continuity. Replace damaged test cables, before using the Test
Set.
•
Do not operate the Test Set around explosive gas, vapor, or dust.
•
Do not operate the Test Set with the case (or part of the case) removed.
•
Recharge the battery as soon as the low battery indicator appears. With a
low battery, the Test Set might produce false readings.
•
When servicing the Test Set, use only specified replacement parts.
1-4. Software Revision
To view the software revision number and the date of release, press and hold
the RESTART key while powering up the unit.
1-5. Self Test
After the startup screen, a self test will activate and the version build date will
be displayed. To perform an LED test, press and hold the RX INPUT key
while powering up the unit.
W Warnings and Precautions
Introduction
Safety Information
1
1-3