Warranty Terms; Frequently Asked Questions - Globus Genesy 500 User Manual

WARRANTY TERMS

This product is guaranteed to the original purchaser
(client) for a 24-month period from the purchase date
against material defects and manufacturing pro-
blems, provided that the instrument is used properly
and maintained in normal conditions.
To obtain service under warranty, the following con-
ditions must be met:
1. The products must be delivered for repair in their
original packaging; the client must cover all shipping
expenses.
2. Service under warranty requires presentation of a
valid receipt or invoice that demonstrates the pur-
chase date.
3. Service does not change the date of warranty
expiration and does not imply renewal or extension of
the warranty.
4. If, during a requested repair, no defect is found, the
client will nonethe less be charged for expenses rela-
ted to labor involved.
5. The warranty does not apply in case of damage to
the instrument due to: blows, falls, improper or incor-
rect use, use of improper power supply,accidents,
alterations, changes or removal of guarantee seals,
and product infringement. The warranty does not
cover damage during shipping in inadequate pac-
kaging
(see Art. 1).
6. The warranty does not apply to the impossibility of
using the product, to other occasional or conse-
quential expenses, or other purchaser expenses.
ATTENTION: Before returning the instrument for repairs,
carefully read the instructions in this operating
manual. In case of device breakdown, contact your
retailer. The producer reserves the right to apply, at
any moment, any and all necessary modifications to
improve the product's appearance and quality.
Produced by:
DOMINO Srl
Tel.: +39-0438-793052
Fax: +39-0438-796463
E-mail:info@domino.tv.it Email:info@globusitlia.com
The features and dimensions reported in this manual
are not binding. The producer reserves the right to
make changes without notice.
Distributed by:
Globus Italia Srl
Tel.: +39-0438-7933
Fax:+390438793363
REV. 03.09.04
Why, when I increase the current intensity above 10
mA, it returns immediately to 0 mA?
The Globus Electrostimulator checks the level of sup-
plied current. When the current intensity increases
above 10 mA and the circuit is open, the instrument
brings it back to zero. Therefore, before starting any
program, check that the cables are connected and
that the electrodes are positioned on the area to be
treated. In addition, be sure that the electrodes are not
worn, because this could inhibit their ability to conduct
current.
Where should one position the electrodes?
In the back of this manual, there is a comprehensive
electrode placement guide. To verify the correct pla-
cement of electrodes, use the special Find Motor Points
Pen program or follow this empirical method: place the
electrode as indicated in the figures in the back of this
manual; start the stimulation; with your hand, move the
electrode by sliding it along the muscle without remo-
ving it from the skin. You will notice a change in con-
traction according to the different positions. Place the
electrode where the
Remember to decrease the intensity to zero (0 mA)
before moving the electrodes.
Is it possible to use the electrostimulator during men-
struation?
Electrostimulation may interfere in some way with men-
struation, causing anticipation, delay, accentuation or
reduction of the cycle; however, these effects are sub-
jective and highly variable. It is recommended to avoid
treatments in the abdominal zone during menstruation.
Is it possible to use the electrostimulator during lacta-
tion?
Until now, no collateral effects regarding lactation
have been observed. Nonetheless, during lactation, it
is recommended to not stimulate the thoracic region.
Are dermatological diseases (e.g. psoriasis, urticaria)
contraindications for electrostimulation?
Yes, do not treat areas affected by dermatological
diseases.
When are the first results of electrostimulation appa-
rent?
Aesthetic results of electrostimulation are always sub-
jective. For Toning program, with a regular program of
3-4 sessions per week, a noticeable result may be
observed after 15 days. For Lipolysis and Drainage
programs, 40 days of treatment are necessary. Results
are obtained more quickly if treatments are combi-
ned with good physical activity and a correct life
style.
How many sessions I can weekly perform?
For physical training, consult the program of weekly
training in the Globus Personal Trainer . For fitness and
aesthetics programs, the number of sessions depends
on the type of treatment: 3-4 sessions per week on
alternate days are suggested for toning; daily treat-
ments are permitted for Lipolysis and Drainage pro-
grams
contraction is greatest.
35