Using The Stimulator - Globus Genesy 500 User Manual

USING THE STIMULATOR

Before you start
- Read this operating manual with attention.
- Carefully examine the electrostimulator and supplied parts to ensure absence of damage.
- Check that the electrostimulator is not connected to the battery charger.
Starting up
- Connect the cables to the outlets on the main unit.
- Connect the electrodes to the cables.
- Place the electrodes on the skin of the body part to be treated.
- Turn on the Electrostimulator by pressing the ON/OFF/OK button for 3 seconds: a tone indica-
tes that the unit is on and the unit's name and software version appear on the lower left-hand
corner of the display. After a few seconds, the last executed program (or default program)
appears on the display. The unit is now ready for use.
- If, when you turn on the unit all the symbols appear on the display, turn off the instrument and
try again. If this problem persists, do not use the instrument and contact an authorized service
center.
- If the batteries are not sufficiently charged, the instrument will switch off immediately.
Recharge the batteries following instructions in section "Battery Charging".
- Use the UP and DOWN keys of keyboard to chose your option on the main menu: the "Last
10 Executed" programs, the "Program List", "Favorites", "Setup" and XXXX.
- By pressing the OK key after having selected "Last 10 Executed", the display shows the area,
the muscular group and the name of the last executed program. If no program has been car-
ried out before, the message EMPTY appears; proceed to the "Program List".
Program selection from the Program List menu
Use the UP and DOWN keys to position the cursor on "Program List" and confirm by pressing the
OK key. Depending on the model, the display shows the following program sectors:
FITNESS & SHAPE
PAIN - ANTALGIC
REHABILITATION
MEDICAL CURRENTS
MICROCURRENTS
VASCULAR
Step 1 - Selection of Area:
Press the keys Up or Down on the Joy pad to move the highlight bar to the desired area. Press
OK to confirm. Press the Left key (Back) for 3 sec. in order to return to the previous display.
Step 2 - Selection Man_Woman
-If the areas Fitness & Shape is confirmed in STEP 1, the selection Man or Woman will appear.
-If one of the other areas is confirmed in STEP 1, it will be possible to select a list of programmes.
Press the keys Up or Down on the Joy pad to move the highlight bar to the desired selection.
Press
Press OK to confirm.
Press the Left key (Back) for three sec. in order to return to the previous display.
Step 3 - Selecting the programme name.
Press the keys Up or Down to select the name of the desired program.
Press OK to confirm.
Press the Left key (Back) for three sec. in order to return to the previous display.
Step 4 - Selecting the part of the body. Programme start-up.
Once you have selected the programme, you can return to the previous display (pressing
down the key Left/Back for 3 sec.) or you can start it increasing the intensity of the channel. The
intensity can be increased individually using the keys "increase intensity of channels keys", or
simultaneously for the 4 channels using the "Up" key on the Joy pad.
12
REV. 03.09.04