Introduction - Bosch Greentherm T9800 SEC 160/199 Applications Manual

Application Manual

2 Introduction

This Applications Manual is intended to present some of the most common
applications of the Bosch Greentherm tankless water heaters. Application drawings
are shown with both piping and corresponding electrical schematics where
applicable. Auxiliary equipment depicted does not necessarily represent any one
manufacturer or specifi c model number. There are a wide variety of techniques,
practices and piping strategies possible when installing water heating appliances. It
is the responsibility of the installing contractor to determine the best solution for the
application.
NOTICE: All drawings are conceptual in nature
and do not address all design, installation or safety considerations.
Additional safety and/or auxiliary equipment may be needed.
Drawings are for reference use by offi cials, designers and licensed
installers. It is expected that installers have adequate knowledge
of accepted industry practices for the equipment, procedures, and
applications involved. It is the responsibiltiy of the installer to ensure
that the installation is in accordance with local building codes.
Although this manual covers many common applications for our products, system
possibilities are virtually endless. Should you encounter an application that is
not covered in this manual or have any questions regarding any of its content, we
encourage you to contact your local sales representative or us directly at Bosch
Thermotechnology Corp.
This manual is not a substitute for any of the appliance installation manuals. All
specifi cations are subject to change.
Installation must conform with local codes or, in the absence of local
codes, the National Fuel Gas Code ANSI Z223.1/NFPA 54.
In Canada: Installation must conform with CGA B149.(1,2)
INSTALLATION CODES and/or local installation codes.
Bosch Thermotechnology Corp. | 06.2017
Greentherm T9800 SE(C) 160/199 | 5
Data subject to change