Switch Status Test - Casio TK-6500 Service Manual

7-4. Switch status test

Press "C" button or changing the switch condition,the switch status is appeared on the
transaction place of the display. The clerk key switch condition is shown at the 6 and 7 digit
number's place of display. For the clerk button model, the pressed LED will light on.
[DISPLAY]
Clerk key condition (Germany)
00 : Not inserted key
01 to 16 : Clerk key number
Paper near end sensor
Off : Normal (Paper end switch OFF)
On : Near end (Paper and switch ON)
Drawer sensor
Off : Drawer close
On : Drawer open
Menu switch conditon (Only for TK6000 and TK7000)
0 : Switchs are both off condition.
1 : Menu 1
2 : Menu 2
Mode switch status
0 : No connetion
1 : PGM
2 : RF
3 : REG1
4 : REG2
5 : X
6 : Z
7 : XZ2
8 : OFF
- 30 -
Allways off
NOTE: Receipt TAIWAN sensor
Off: No mark position
On: Mark position
Allways off
NOTE: Validation sensor (Not used)
Off: Normal
On: Validation paper in
ROM cassette condition
Off : Not mounted
On : Mounted
Allways off
Allways off
Allways off
NOTE: Journal TAIWAN sensor
Off: No mark position
On: Mark position