Mechanical system
11
Initial operation
NOTE:
Observe the safety information given in the operating
instructions!
Carefully read the operating instructions before operating
the heater.
Carefully bleed the fuel supply system after installing the heater.
11.1. Installation / initial operation of Air Top Evo System
Installation
1. Install the heater in accordance with the installation instructions
2. Connect in accordance with the wiring diagram (See
"Schakelschema's" on Page 136.)
3. Install the heater control element and room temperature sensor
94
Air Top 2000 ST / Evo 40 / Evo 55
12
Faults
If a malfunction occurs, the operating indicator will show a flash code or
the Combi timer a fault code F .
Follow the instructions in the workshop manual to rectify a fault.
Boat Air Heaters