Gardeo GSEBRTHE18VLI Original Instructions Manual page 44

Technical data:
Mains voltage
HEDGE TRIMMER
G.W
cutting length:
No load speed:
Max. cutting dia.
LpA(sound pressure lever):
LwA(sound power lever):
Guaranteed noise level
Vibration value:
The declared vibration total value has been measured in accordance with a standard test method
and may be used for comparing one tool with another that the declared vibration total value may also be
used in a preliminary assessment of exposure.
A warning that the vibration emission during actual use of the power tool can differ from the
declared total value depending on the ways in which the tool is used and of the need to identify safety
measures to protect the operator that are based on an estimation of exposure in the actual conditions of use
(taking account of all parts of the operating cycle such as the times when the tool is switched off and when it
is running idle in addition to the trigger time).
Page 44 de 65
18 V Rated frequency
Battery life: 35min
SAMSUNG
2.0AH LITHIUM Charging time: 3 hours
CHAINSAW
4.4Kg
400 mm Bar length:
Cutting length:
-1
1700/ min Saw speed:
Oil tank capacity:
12 mm
72.3 dB LpA(sound pressure lever):
K=3dB
92.5 dB LwA(sound power lever):
K=3dB
96 dB Guaranteed noise level
front handle Vibration value:
5.173m / s ²
Rear handle
3.617 m / s ²
K = 1.5 m / s ²
The sound power pressure may exceed 85 dB(A), in this case
individual hearing protection must be worn.
ATTENTION !
50 Hz
4 Kg
8''
20cm
3.4 m/s
100 ml
73.7 dB
K=3dB
94.3 dB
K=3dB
96 dB
front handle
2.726 m / s ²
Rear handle 1.978
m / s ²
K = 1.5 m / s ²