Hdmi Mode; Pc Mode - Tele System PALCO 22/L03 User Manual

VCR/VCD
DVD/PVR
DECODER
CAMCORDER
VIDEO GAME
VIDEO

9.2-HDMI Mode

Connect to the HDMI input at the back of
your TV by using the connector located on
your PC or your digital video-transmission
device with a suitable cable (not supplied
with the TV).
Note 1: To be able to watch an image in
the HDMI mode, your computer must be
equipped with a HDMI graphic card.
You may display the resolution information by
pressing the INFO button.
HDCP
Your TV supports HDCP feature. To use
this feature, you must set up a connection
to your TV set's HDMI video port and select
HDMI by pressing the AV key on your remote
control.

9.3-PC Mode

Your LCD television can also be used as a
PC monitor via the VGA input.
SCART SOCKET
HDMI input
R
L
9.3.1-PC Connection:
Connect the D-Sub15 connector to the PC-
IN input on the rear of your television using a
suitable cable (not supplied with the television).
Again using a suitable cable, you can also listen
to the sound from your PC by connecting the
sound output of your PC to the PC AUDIO-IN
input on the rear of your television.
9.3.2-Transition to the PC Mode
For your LCD-TV to switch to the monitor
(PC) mode, press the AV button on your
remote control. The AV menu appears on the
screen. Select PC by pressing the Up/Down
movement buttons and press the OK button.
9.3.3-PC Setting
Enter into the SETUP menu from the Main
Menu by pressing the MENU button in the PC
mode. In order to make the necessary settings
in this menu, you can use the Up/Down,
Right/Left movement buttons on your remote
control. You can make the following settings for
your monitor in this menu.
9.3.4-HORIZONTAL POSITION: Horizontal
position setting
9.3.5-VERTICAL POSITION: Vertical position
setting
9.3.6-CLOCK FREQUENCY
This is the pixel clock frequency. User can
narrow down or enlarge the display by
selecting a desired value.
9.3.7-PHASE
Using the -VOL/VOL+ movement buttons,
you can ensure that the colors and shapes are
exactly consolidated on the PC image.
9.3.8-AUTOCONFIGURATION
The most suitable geometric settings in
accordance with the entry mode are configured
by this function. For this operation, select the
AUTOCONFIGURATION tab and press OK
button. You can adjust the volume level of
the source you have connected to the Audio-
In input at the back of your TV by using the
-VOL/VOL+ buttons.
Note: In the Monitor mode, you can make the
Brightness, Contrast, Sharpness, Red, Green
and Blue Settings from the PICTURE menu.
23 I
EN