Channel Number - Tele System PALCO 22/L03 User Manual

Select PROGRAM NO tab by pressing
the Up/Down movement buttons in Setup
menu, enter the channel number to be
searched and stored automatically, then
select AUTOPROGRAM tab by using the
Up/Down movement buttons and press
OK button; Country Selection menu will be
displayed.
COUNTRY SELECTION
BELGIUM
CZECH REP
DANMARK
DEUTSCHLAND
ELLADA
ESPANA
FRANCE
HUNGARY
IRELAND
ITALIA
START AUTOPROGRAMMING
In the Country Selection menu, select the
country, whose broadcast you would like
to watch in priority, by pressing the Up/
Down or Right/Left movement buttons and
start autoprogramming by pressing the OK
button. The channels will be automatically
searched and those found will be stored in
memory starting from the program selected
in the setup menu. At the same moment,
the Autoprogram menu will be displayed
and a marker indicating the progress of the
autoprogramming will appear as shown
below.
SEARCHING
To stop the process at any given time,
please press the MENU button. The
Program Table, which will allow you to sort
the channels as you wish, will be displayed
after the auto-search is complete.
6.4.2- Manually searching and
storing the channels
6.4.2.1-If you already know the

channel number:

Press the MENU button. Move to the
SETUP menu by pressing the down
movement button in Main Menu and
confirm your selection with OK button.
The Setup menu is displayed.
NETHERLANDS
NORGE
ÖSTERREICH
POLSKA
SCHWEIZ
SUOMI
SVERIGE
TÜRKİYE
U.K.
..........................
BACK
% 20
STOP
SETUP
SYSTEM
CHANNEL
FINE TUNE
SEARCH
PROGRAM NO
STORE
AUTOPROGRAM
Select the system in which you
would like to make the search from
the SYSTEM tab by pressing the
Right/Left movement buttons. Move
into CHANNEL tab by pressing the
Down movement button. Press OK
on your remote control and select
"S" for cable channels and "C" for
channels received via the antenna.
Move onto the PROGRAM NO tab
and enter the channel number in which you
would like to have the channel stored. If the
broadcast viewed on the screen is of your
desired quality, first move onto the STORE
tab with the down movement button to
store in the memory the selection you have
made and store the channel by pressing
the right or left movement buttons. The
prompt STORED will be displayed briefly.
The channel will be stored according to the
program number of your choice. You can
tune and store in memory other channels the
same way. In the event that you wish to exit
the channel settings menu for any reason,
simply press the MENU button.
6.4.2.2-If you do not know the
channel number
Press the MENU button. Move to the
SETUP menu by pressing the down
movement button in Main Menu and
confirm your selection with OK button.
The Setup menu is displayed. Select
the system in which you would like to
make the search from the SYSTEM
tab and move to the Channel tab by
pressing the down movement button.
Press OK on your remote control and
select "S" for cable channels and "C"
for channels received via the antenna.
Select SEARCH tab using the up/
down movement buttons, and scan
the channels in ascending order with
14 I
EN
BG
S06
0
< >
P13
SELECT
BACK