Tele System PALCO 22/L03 User Manual page 44

Right movement button and in descending
order with Left movement button. If the
channel that is found is of your liking, select
the STORE tab. Then store it in the memory
pressing the right or left movement buttons.
Repeat the same procedure for other
channels by selecting the program number
of your choice from the PROGRAM NO tab.
If the channel you found is not of the desired
quality and requires Fine Tuning or if you
would like to rename the channel, refer to the
relevant sections.
6.4.3-Fine Tuning
If the channel you found is not of the
desired quality, then select the FINE
TUNE tab by pressing the Down
movement button in the Setup menu.
Using the Left/Right movement
buttons on your remote control,
adjust the broadcast displayed on the
screen to your desired quality. Under normal
circumstances, you will not require to use
the Fine Tune function. The AFC values of
your television will automatically adjust and
lock themselves to the channel. However,
you might need it in case the television
transmitters do not operate according to
the standards. To store in the memory, the
settings you have made, select the STORE
tab and press the Right or Left movement
button.
SETUP
SYSTEM
CHANNEL
FINE TUNE
SEARCH
PROGRAM NO
STORE
AUTOPROGRAM
SELECT
6.4.4-Program table
Press the MENU button. Move to the
PROGRAM TABLE tab by pressing the
Down movement button in Main Menu and
confirm your selection with the OK button.
Program table menu will be displayed.
BG
S06
0
< >
P13
BACK
PROGRAM TABLE
00
Channel 01
Channel 02
03
04
SKIP
MOVE
SELECT
6.4.4.1-Switching the locations of
the stored channels
Select the program you would like to
relocate by pressing the Up/Down or
Left/Right movement buttons. "Press
the "GREEN" button. The color of the
channel name will change. Move to
the other program you would like to
relocate by pressing the Up/Down or
Right/Left movement buttons. Finish
the relocation process by pressing the
"RED" colored confirmation button.
The channel in the first program number you
selected has been moved to your second
selected program number and the channels
between both program numbers have been
shifted to the initially selected program
number. After setting is complete, press the
MENU button to exit the menu.
6.4.4.2-Deleting a stored channel
Select the program you would like to
delete by pressing the Up/Down or
Right/Left movement buttons while
you are in the program table. "Press
the "BLUE" button. You can perform
the deletion process by pressing the "RED"
confirmation button or abort the process by
pressing the "GREEN" button. "Once you
pres the "RED" button, the selected program
is deleted and the following channels are
transferred to previous program number.
After setting is complete, press the MENU
button to exit the menu.
15 I
EN
05
10
06
11
07
12
08
13
09 14
NAME
DELETE
BACK