Performing Analog Tunings; Signal Information; Software Update; Time Settings - Tele System PALCO 22/L03 User Manual

To perform language selection, select
Subtitle Mode Subtitle and Teletext
Language, Subtitle Language 2 Audio
Language or Audio Language 2 from
the Language Settings menu by using
Up/Down movement buttons and make
your language selection with Left/Right
movement buttons. You can also select
subtitles directly by SUBT button on your
remote control or make sound selection by
AUDIO button.

6.3.5.2-Time Settings

To perform the time settings, select Time
Adjustment tab from the Time Settings
menu by usingUp/Down movement buttons
and make your selection by using Right/
Left movement buttons. If you set the Time
Adjustment tab to Manuel , Time Zone,
Daylight Saving tabs will be activated, if
you set it to Automatic, these options will be
deactivated.

6.3.5.3-Parental Control

You can restrict viewing some programs
with this feature. If the program to be
broadcasted is over the age restriction you
entered, the channel will not be displayed
and a password screen will appear. To view
the program, correct password must be
entered. You must type the password, which
is set to 0000 at the factory in order to enter
the Parental Control menu. You can change
the password as you wish under Change PIN
menu in the Parental Control menu. You can
set the restriction or disable it by selecting
one of the Child, Youth, Adult or None
options from the Parental Lock Deg. tab
while the Parental Control tab is set to On.
You can change the PIN as you wish from
the Change PIN tab. To do this, enter the
Change PIN menu, enter your new password
twice. Your password will be changed.
6.3.5.4-CA-Module
In this menu, you can make the CI Module
settings that you can attach to your
television. You can not enter this menu if a
CI module is not installed to your television
and the menu displays No CA-Module
message.

6.3.5.5-Signal Information

This menu provides information about
Channel, Modulation, Quality and Signal
Strength of the Channel you are watching.
Press BLUE button to return to the previous
menu and EXIT button to exit the menu.

6.3.5.6-Software Update

You can perform automatic software update
with this feature. To do this, select On at
the Auto Upgrade tab by using right/left
movement buttons and move onto Search for
new software tab and press OK button. New
software is searched by means of the OAD
method and installed if any.
6.3.5.7-Version
Current Version information of the television is
displayed at the end of this line.

6.4-Performing Analog Tunings

You can either tune the programs
automatically or manually and store them in
your television.
6.4.1-Automatic tuning of channels
and storing in the memory
Note: If your television does not receive any
antenna broadcast for a period of 5 minutes,
it automatically switches to the stand-by
position. The countdown symbol is displayed
on the screen during the last 1 minute.
You can tune the programs
automatically with the Autoprogram
function of your television and then sort
the channels as you desire by means
of the Program Table. Press the MENU
button on your remote control. Select
SETUP tab by pressing the down
movement button and confirm your selection
with OK button. Setup menu is displayed.
SETUP
SYSTEM
CHANNEL
FINE TUNE
SEARCH
PROGRAM NO
STORE
AUTOPROGRAM
13 I
EN
BG
S06
0
< >
P13
SELECT
BACK