Sending Tones - Subaru STARLINK Manual

PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)
No. Function
Select to send tones. This button only appears
when a number that contains a (w) is dialed in
hands-free mode.
Select to hang up the phone.
Select or to adjust the volume of the
other party's voice.
Select to start talking with the other party.
NOTE
When cellular phone call is changed to hands-free call, the
l
hands-free screen will be displayed and its functions can be
operated on the screen.
Changing between cellular phone call and hands-free call can be
l
performed by operating the cellular phone directly.
Transferring methods and operations will be different depending
l
on the type of cellular phone you have.
For the operation of the cellular phone, see the manual that
l
comes with it.
Turn the "POWER/VOLUME" knob, or use the volume control
l
switch on the steering wheel to adjust the volume of the other
party's voice.
128

SENDING TONES

Page
BY DIAL PAD
128
This operation cannot be performed while driving.
-
1.
Select
Dial Pad
-
129
2.
Enter the desired number.
BY SELECTING
Release Tones
continuous tone signal(s) containing a (w) is registered in
the contact list.
This operation can be performed while driving.
1.
Select
Release Tones
(Dial Pad).
Release Tones (Release Tones)
(Release Tones) appears
(Release Tones).
when a