Voice Recognition System Operation - Subaru STARLINK Manual

VOICE RECOGNITION SYSTEM OPERATION

NOTE
Voice commands may not be recognized if:
l
• Spoken too quickly.
• Spoken at a low or high volume.
• Driving with a window open.
• Passengers are talking while voice commands are spoken.
• The air conditioning speed is set high.
• When air from the ventilator blows directly toward the
microphone.
In the following conditions, the system may not recognize the
l
command properly and using voice commands may not be
possible:
• The command is incorrect or unclear. Note that certain words,
accents or speech patterns may be difficult for the system to
recognize.
• There is excessive background noise, such as wind noise.
VOICE RECOGNITION SYSTEM OPERATION
1.
Press the talk switch.
● After the voice recognition top screen has been
displayed, speech guidance will commence.
NOTE
A caution display appears after pressing the talk switch while
l
an external device is connected and the stored data is being
read. Be sure to start the operation after the caution display
disappears.
When the voice recognition mode is in audio mode, voice
l
guidance for the voice recognition system can be skipped by
pressing the talk switch.
252
2.
Say the command.
● Commands related with each function are displayed
on the screen of the each function tab. Some
commonly used commands are displayed on the
screen of the main tab. Even if any tab is selected, all
commands can be operated.
● Selecting (Help) or saying "Help" prompts
Help
voice guidance to offer examples of commands and
operation methods.
● To cancel voice recognition, select
or press and hold the talk switch.
(Cancel),
Cancel