Subaru STARLINK Manual page 255

VOICE RECOGNITION SYSTEM OPERATION
NOTE
While the recognition data is being created or being updated, a
l
track search cannot be performed using a voice command.
VOICE COMMAND EXAMPLE: CALL NAME
1.
Press the talk switch.
2.
Say "Call <contacts> <phone types>".
● If multiple matching items are found, a selection
screen will be displayed. Say "<number>" or select
the number.
NOTE
In the same manner as it is displayed on the screen, "Call
l
<contacts> <phone types> (Call <contacts> <phone types>)",
after saying "Call a contact" say the name, or the name and
type of phone, of a contact.
For example: "Call a contact", "John Smith" or "Call a
contact", "Mary Davis", "Mobile"
There are 4 types of phones: Home, Mobile, Work and Other.
l
Short or abbreviated names in the contacts list may not be
l
recognized. Change names in the contacts list to full names.
Sometimes a voice recognition result confirmation screen will be
l
displayed. After confirming the result, say "Yes" or "No".
254
NOTE
When the system recognizes multiple names from the contacts
l
list, a name candidate list will be displayed on the screen. If the
desired name is not displayed on the top of the screen, say or
select the number of the name from the candidate list (number 1,
number 2, etc.) to select a name from the candidate list.
When a contact has multiple phone numbers registered in the
l
contacts list, a candidate list will be displayed. If the desired
phone number is not displayed on the top of the screen, say
or select the number of the desired phone number from the
candidate list (number 1, number 2, etc.) to select a phone
number from the candidate list.
VOICE COMMAND EXAMPLE: DIAL NUMBER
1.
Press the talk switch.
2.
Say "Call a number".
3.
Say "Call <number>".
● Say the phone number one digit at a time.
For example, if the phone number is "4251231234":
Say "four two five one two three one two three
four"