BASIC OPERATION
POSITION MARKER
SELECTED MAP LOCATION (CURSOR)
Use one of the following methods to mark a map location.
● Select the map during navigation.
● Select the map when the destination you want is
displayed in the search results.
● Select the map in "Find on Map (Find on Map)".
You can use the cursor's position as the route's destination,
search for locations around the cursor, and save the position
in the destination list.
● After selecting a map location, a cursor is displayed
at the point selected on the map. The cursor is
displayed as a red point (
all zoom levels.
206
) and can be checked at
TRAFFIC INFORMATION
DISPLAYING TRAFFIC INFORMATION
Road sections affected by traffic conditions are displayed in
a different color on the map, and a small icon representing
the type of traffic condition is displayed above the road.
You can change the items displayed by setting the Traffic.
(→P.239)
1.
Select
on the map screen.
2.
Select
(Event List).
Event List
3.
Select the desired event type.
4.
Select the desired traffic information.
5.
Check that the traffic condition is displayed.
●
: Select to open another screen displaying
information on the selected map position.