Sending Tones; Transmit Volume Setting - Subaru Outback 2017 Owner's Manual

PHONE OPERATION (HANDS-FREE SYSTEM FOR CELLULAR PHONES)

SENDING TONES

BY DIAL PAD
This operation cannot be performed while driving.
1.
Select (Dial Pad).
Dial Pad
2.
Enter the desired number.
BY SELECTING Release Tones
(Release
Release Tones
continuous tone signal(s) containing a (w) is registered in
the contact list.
This operation can be performed while driving.
1.
Select (Release Tones).
Release Tones
126
(Release Tones)
Tones) appears when a
NOTE
A continuous tone signal is a character string that consists of
numbers and the characters "p" or "w". (e.g. 056133w0123p#1 )
When the "p" pause tone is used, the tone data up until the
next pause tone will be automatically sent after 2 seconds have
elapsed. When the "w" pause tone is used, the tone data up
until the next pause tone will be automatically sent after a user
operation is performed.
Release tones can be used when automated operation of a
phone based service such as an answering machine or bank
phone service is desired. A phone number with continuous tone
signals can be registered in the contact list.
Tone data after a "w" pause tone can be operated on voice
command during a call.

TRANSMIT VOLUME SETTING

1.
Select (Mic Volume).
Mic Volume
2.
Select the desired level for the transmit volume.