Network Settings; Adding Ip Cameras - LTS LTD8304K-ET Quick Start Manual

3.8 Network Settings

Purpose:
Network settings must be properly configured before you operate DVR over network.
Step 1 Enter the Network Settings interface.
Menu > Configuration > Network
Step 2 Select the General tab.
Step 3 In the General Settings interface, you can configure the following settings: NIC
Type, IPv4 Address, IPv4 Gateway, MTU and DNS Server.
If the DHCP server is available, you can check the checkbox of DHCP to
automatically obtain an IP address and other network settings from that server.
Step 4 After having configured the general settings, click the Apply button to save the
settings.
 1 self-adaptive 10M/100M/1000M network interface is provided for
LTD83XXK-ET and LTD85XXK-ST series DVR.
 If DHCP is enabled, you can check the checkbox of Enable DNS DHCP or uncheck
it and edit the Preferred DNS Server and Alternate DNS Server.

3.9 Adding IP Cameras

Purpose
Before you can get live video or record the video files, you should add the network
cameras to the connection list of the device.
Before you start
Digital Video Recorder Quick Start Guide
Figure 3-21 Network Settings
25