AAD Vigil Cuatro User Manual page 37

I. Unscrew Connectors
Locking Clip (CLC)
V. Reconnect and manually
tighten the new spare unit
(Cutter or Control unit)
If the CLC is missing, damaged, or if not correctly positioned, DO NOT JUMP with this Vigil
You can order a new Free CLC at your dealer, A.A.D. nv/sa Belgium or Vigil America.
II. Remove Connectors
Locking Clip (CLC)
VI. Place Connectors Locking
Clip (CLC), and check if
CLC locks both connectors
It is mandatory to CORRECTLY place the Connectors Locking Clip (CLC) !!
III. Manually unscrew
connector of spare unit
(for example cutter)
VII.
After CLC is well
positioned, secure with
original screw.
IV. Unplug connector
VIII. Check if CLC is closely
attached to Main Box (no
space between both objects)
Cuatro !!
®
33