Waterproof - Ip68; Replacement Of Parts Of The Vigil® Cuatro - AAD Vigil Cuatro User Manual

6. Waterproof – IP 68
The Vigil Cuatro has been designed to resist water immersion of up to 1.8 meter (6 ft) depth for a maximum of
®
24 HOURS (IP 68). After such immersion or contact with water, always first switch off the Vigil
The Vigil Cuatro built-in stainless steel filters does not need to be replaced.
®
The 3 filters need to be dried with a water absorbent cloth, household paper or a cotton swab.
Leave the device for 12 hours in an environment with a ambient temperature of +18°C (+65°F) before the installation in a rig.
If the Vigil Cuatro has been in contact with salt water, first switch off the Vigil
®
IT IS MANDATORY TO SEND THE VIGIL
THE NEXT JUMP IN THE FOLLOWING CASES:
- IF THE VIGIL Cuatro HAS BEEN IMMERSED IN SALT OR CLEAR WATER DEEPER THAN 1,8 METER (6 ft).
®
- IF THE VIGIL Cuatro HAS BEEN IMMERSED FOR MORE THAN 24 HOURS IN WATER.
®
Do not open your Vigil
7. Replacement of Parts of the Vigil® Cuatro
7.1. Replacing the Battery Pack
VIGIL Cuatro Dual Battery Pack, can only be changed by A.A.D nv/sa Belgium or Vigil America.
®
Therefore the VIGIL Cuatro has to be returned for a battery change.
®
For Battery replacement, please contact A.A.D.nv/sa Belgium or Vigil America.
The battery must be replaced after 10 years of use (operational life).
Cuatro BACK TO THE FACTORY FOR AN INSPECTION OF THE UNIT BEFORE
®
Cuatro's main box case.
®
Cuatro.
®
Cuatro, before rinsing it with clear water.
®
31