Config» Menu (Configuration) - AAD Vigil Cuatro User Manual

(*) Certain special models may be equipped with custom-built or experimental software.
In such cases, a specific identification logo on the cover is used, and a specific manual will be issued.
The information supplied for those units could be different from that supplied for the Vigil Cuatro units.
®
Vigil Cuatro logo Vigil II and Vigil 2+ logo Xtreme 46 logo
3.5.7. «CONFIG» Menu (Configuration)
21
This configuration menu allows you to choose the type of measurement units you wish to display,
reverse the display characters and adjust the contrast of the display.
To enter into the configuration menu, press the push button as soon as the display indicates «CONFIG» and
the red LED flashes.
Initially, the display indicates «Feet» or «Meters», depending on the existing configuration.
To change the measurement unit, press the push button.
You can choose «U.S.» or «Metric» by pressing the push button (°Fahrenheit, mph, inches of mercury or
° Celsius, km/h, hectoPascal).
Press «View» to choose to view the display in its normal configuration or flipped 180° «View»
Once the «CONFIG» menu is completed, the Vigil Cuatro is operational and will keep in memory the chosen configuration.
®