Start Up And Shut Down Procedures; Start Up - Display - AAD Vigil Cuatro User Manual

3.5. Start Up and Shut Down Procedures

It is imperative that the Vigil
(This becomes the "GROUND ZERO" reference altitude).
Never switch on your Vigil
If the Vigil
complete the start up procedure, and will show a alternating blinking "GROUND ZERO
WARNING" on the controller LCD.
14
Your Vigil
3.5.1 Start Up – Display
In its standard configuration, the Vigil
of the display. The red LED is positioned in the upper corner and indicates the timing of the start up procedure.
The green LED is situated in the bottom corner of the controller and confirms the end of the start up procedure.
The Vigil
®

Cuatro be switched ON at the ground level of your take-off zone.
®
Cuatro discovers a variable air pressure during the start up procedure, it will not
®
Cuatro will recalibrate itself for variation in the atmospheric pressure.
®
Cuatro is used with the orange push button situated at the right side
®
Cuatro's display is reversible (see page 21 § 3.5.7.) «view»
Cuatro in an aircraft !
®